Thiết bị đo mức siêu âm - Pulsar IMP

Thiết bị đo mức siêu âm  - Pulsar IMP

The IMP range of non-contacting level sensors from Pulsar Measurement are designed to be used wherever you need an accurate and reliable level indication. The unique digital echo process techniques featured in the IMP range of level sensors mean the units are perfect for slurries, liquids, or anywhere where you need a display giving you a level indication or analog output to interface with your existing site control system or to drive a display. 

There are several measurement ranges available from 200 mm to 10 m (7.9 in to 32.8 ft) and each sensor can be wired for 2 or 3-wire operation. All IMP options feature an LCD display and digital temperature measurement and compensation. Combine the IMP level sensors with PC Suite 4.0 and users will be able to download, analyze, and store echo profiles, set up the sensor parameters, install new firmware, and add a flow curve to configure level to flow linearization. 

The IMP level measurement units are suitable for water and wastewater applications, industrial level measurement, tank level measurement, stock control, and health and safety compliance. 

 

General Specifications
Spec: Description:
Dimensions 186 mm (H) x 133 mm (D) (7.3 in (H) x 5.2 in (D))
Cable Entry:  2 off cable glands 4.5 mm to 10 mm (0.2 in to 0.4 in); Torque to 2 NM
Mounting:  IMP3 - 3 m (9.8 ft) version: 1.5 in BSP/NPT
IMP 6 - 6 m (19.7 ft) version: 1.5 in BSP/NPT
IMP10 - 10 m (32.8 ft) version: 2 in BSP/NPT
Suits BSP & NPT, parallel and tapered
Weight Nominal 1kg (2.2 lb)
Enclosure Protection IP67
Temperature (Process) -4 0°C to +65 °C (-40 °F to +149 °F )
Temperature (Ambient) -40 °C to +80 °C (-40 °F to +176 °F)
Input Voltage Range 11-30 V, 3.5-22mA
Accuracy ±0.25% or 6 mm (0.2 in) whichever is greater
Resolution ±0.1% or 2 mm (0.1 in) whichever is greater
4-20mA Outputs Resolution 5 μA; both active and passive outputs
Temperature Compensation Via internal temperature sensor 0.5 °C (± 32.9 °F) accuracy. Level and volume conversion are installed allowing linearisation for tank shapes.
PC Interface All parameters can be accessed and changed through PC Suite software. Echo traces may be viewed on-screen.
 

Download Tài Liệu

Download

DỊCH VỤ NHANH VÀ ĐÁNG TIN CẬY CHO CÁC DỰ ÁN CỦA BẠN

Liên hệ với chúng tôi để tìm giải pháp tối ưu cho dự án của bạn.

Liên hệ